Irvine, CA · Orange County · 2026

How much does a fence cost in Irvine?

Irvine's villages are built with block walls and tubular steel view fences, and HOAs control almost every change, down to the paint color.

Quick answer

A 150 ft, 6 ft fence with two gates costs about $5,000 in wood or $6,200 in vinyl in Irvine, which is about 18% above the national average.

Updated November 2026 · Prices are installed ballparks from our free estimator, not a contractor bid.

Why do fences cost more in Irvine

The Orange County area has some of the highest construction labor costs in the country, and fence installers here charge accordingly, so expect prices about 18% above our national ballpark.

Irvine is one of the largest master-planned cities in the country, with villages of similar stucco homes under concrete tile, built from the 1970s to today.

Our estimator applies the same Irvine adjustment when you price a fence at a Irvine address, so this page and your estimate match.

Irvine vs. national ballpark

+18%

6 ft wood fence: $31/ft here vs. $26/ft nationally.

Irvine fence prices per foot

Installed, per linear foot, at Irvine prices.

Fence cost per foot in Irvine by material and height
Material4 ft tall6 ft tall8 ft tall
Wood$28/ft$31/ft$33/ft
Vinyl$35/ft$39/ft$41/ft
Aluminum$40/ft$42/ft$46/ft
Wrought Iron$54/ft$58/ft$63/ft
Chain Link$19/ft$20/ft$21/ft

Irvine fence prices by length

Fence only, before gates, at each material's most common height, at Irvine prices.

Fence cost by length and material
Fence lengthWood (6 ft)Vinyl (6 ft)Aluminum (4 ft)Wrought Iron (5 ft)Chain Link (4 ft)
100 ft$3,068$3,894$4,012$5,664$1,888
150 ft$4,602$5,841$6,018$8,496$2,832
200 ft$6,136$7,788$8,024$11,328$3,776
300 ft$9,204$11,682$12,036$16,992$5,664

The most common fences in Irvine, and why

  1. 1

    Block walls

    The standard rear and side-yard enclosure.

  2. 2

    Wrought iron fence

    About $57/ft at 5 ft in Irvine

    Tubular steel view fencing on slopes and greenbelts.

Our estimator prices wood, vinyl, aluminum, iron and chain link fences; get a local quote for walls and specialty fencing.

Building a fence in Irvine: what to plan for

Sun and heat

Strong sun dries wood out and fades stain fast, so plan to re-stain more often. Vinyl and powder-coated aluminum hold their color best in intense sun.

California's Good Neighbor Fence Act presumes neighbors share the cost of a boundary fence that benefits both, so give your neighbor 30 days' written notice before replacing a shared fence.

Fence permits and HOA rules in Irvine

Fence permits, height limits and setbacks come from the City of Irvine. Many cities require a permit for fences over 6 ft, cap front-yard fences at 3–4 ft and require fences near driveways and corners to stay low for visibility. Pools need a code-compliant barrier. If you're in an HOA, its rules on style, height and color usually apply too.

California roofers must hold a Contractors State License Board (CSLB) license; look up the license number before you sign.

Irvine fence FAQ

How much does a fence cost in Irvine?

With our Irvine prices, a 150 ft, 6 ft fence with a walk gate and a drive gate costs about $5,000 in wood or $6,200 in vinyl. Per foot, that's about $31 for wood and $39 for vinyl, about 18% above the national average.

Why do fences cost more in Irvine?

The Orange County area has some of the highest construction labor costs in the country, and fence installers here charge accordingly, so expect prices about 18% above our national ballpark.

What kind of fence is most common in Irvine?

Block walls. The standard rear and side-yard enclosure.

Do I need a permit to build a fence in Irvine?

Often. Fence permits and height limits come from the City of Irvine; many cities require a permit for fences over 6 ft in back yards and limit front-yard fences to 3–4 ft. If you're in an HOA, get its approval too. California's Good Neighbor Fence Act presumes neighbors share the cost of a boundary fence that benefits both, so give your neighbor 30 days' written notice before replacing a shared fence.

How do I know where my property line is?

Your plat or survey shows it. Property line markers (metal pins) are often buried at the corners. If you're not sure, hire a surveyor before you build; many fences are set a few inches inside the line to avoid disputes with neighbors.

Does a pool need a fence?

In most places, yes. Pool barrier codes based on the International Residential Code generally require at least a 4 ft barrier around a pool with self-closing, self-latching gates and limited gaps. Local rules vary, so check yours.

Related guides

See what your Irvine fence would cost

Draw it on your own property and get an itemized price at local rates in about two minutes. Free.